Ideas for Replace Sling Lounge Chair : Sling Lounge Chair Design

Then to replace sling lounge chair, make half-inch creases on both sides of the sling and pin them in place. These will be hails on the sides of the harness. Set the machine to sew a straight stitch with a standard stitch length, and sew in place by sewing 3/8 inch from the stitch. Set the machine to sew a zigzag stitch and sew along the upper and lower edges of the belt. Iron and half inches times on both the top and bottom sides. Pull a cloth needle with 16 inches of garment wire, and tie the ends together. Wrap the upper folded edge around the bar at the top of the back of the chair. Hand sews the seat to the chair; sew 1/8 inches from the folded edge. When you reach the end of the seam, sew back in the other direction to the starting point, which needle up through the holes you walked through and through the holes you walked through. Attach the lower end of the lifting belt in the same way as you attached the top.

This photo of Sling Lounge Chair Design has dimension 800 x 800 pixels, you can download and obtain the Sling Lounge Chair Design photo by right click on the right click to get the high resolution version.

Here is imperative clue on Sling Lounge Chair Ideas. We have the prime step for Sling Lounge Chair Ideas. Check it out for yourself! You can discover Sling Lounge Chair Design guide and read the latest Ideas for Replace Sling Lounge Chair in here.

Back to Ideas for Replace Sling Lounge Chair

Comments are closed.