Hammock straps – Providing a reliable and comfortable resting place for any excursion or camping in the forest, a tree hammock is an economical option for the injured traveler. Even so, a hammock in full operation can fail the user if the straps are not support or suspended properly. Keeping in mind several factors will keep the weary user safe from a fall. Choosing a suitable strap is essential when using a tree hammock. Straps are better for trees than round cables, since they distribute weight more evenly. Also, although most hammocks come with straps, make sure that the straps are tested and approved for the times at least one and a half times the user’s weight. This ensures that a very loaded backpack or an unruly child is not the cause of a sudden and painful accident. If the hammock does not come with a strap or if the strap needs to be replaced, make sure the new strap is not so thick that it creates friction and excessive wear on the hammock gaps during installation and use.
The tree on the right will make the difference between enjoying a relaxing afternoon and climbing up a sudden fall. When installing a tree hammock, look for trees with logs at least twelve inches in diameter. This size indicates that the tree can support the weight of a hammock at its base. There is no way it exists to ensure a branch does not fall while you rest, but shaking the tree before tying the leash and testing the hammock after strapping the hammock straps can help avoid immediate hazards.
Look for trees separated by four to six feet when hanging the hammock straps. This distance guarantees a large center of gravity when resting and also provides a greater distance from the ground. Install the hammock so that the lowest part of your fabric is four to five feet off the ground. The use of knots that have the weight of the tree and are distributed evenly on the belt helps to relieve stress on the trees, saving them from unnecessary damage.