How to Hang Hammock Swings

0

Hammock swings – When most people imagine their time spent in a hammock, they imagine themselves resting among palm trees in an exotic country with a tasty drink in hand. Hanging a hammock swing from your porch offers a relaxing option for the enjoyment of warm weather. Hammock swings typically have a capacity of 350 lbs. and are suitable for an occupant, providing a vertical position for swinging back and forth. You can install a hammock swing from a solid beam on the roof of the porch, with an oscillating hook in a hardware store or in the hammock installation kit. Hammock swings offer simple installation and disassembly methods.

Related  Modern Inflatable Hammock

Measure at least 3 feet from the wall or railing of your porch, using the tape measure. This allows a space to swing back and forth on the hammock swings. Standing on a ladder positioned 3 feet from the wall or railing. Run a beam detector on the roof of the porch to find a solid beam from which to hang the swing. The studies finder will beep or blink when it passes over a roof beam. Mark the point on the ceiling with chalk.

Drill a pilot hole half the diameter of the hammock swings hook. Screw the swing hammock hook onto the roof of the porch, turning it clockwise with a screwdriver until the eye of the screw is in contact with the roof. Place the hammock ring for the roof hook. The hammock should sit about 2 feet above the ground. If the hammock is too high from the porch floor, connect one end of a link chain to S-hook, connect the S-hook to the hammock ring, and then place a chain link around the roof hook. Wear eye protection when using power tools. The hammock store website warns against vigorously propelling the swing hammock.

Related  Swinging Hammock Hangers
Share.

Comments are closed.