You need to install a hammock with canopy with your own hands. It can be suspended between trees. If there are no natural supports nearby, they must be made of metal or wooden poles that are set taking into consideration the panel length. The arrows are placed in pits at a depth of not less than a meter. For reliability, pour grooves with cement mortar. When it cures, a hammock has been installed with a frame and a canopy. Use a sun-tight, waterproof fabric. The canopy dimensions coincide with the distance between the supports. A roof over the deck is installed. The fastening principle is the same, it is only necessary to tighten with more force so that there is no case. A large umbrella can be used for the canopy, which can be purchased at the store. It is attached to one of the racks.
If you make and install a hammock with canopy and cadaver on your dacha, your family’s comments will only be positive. Adults and children will rest with ease and lie on a hanging bed. But first you need to fill in materials and tools. To start, the crossings should be linked to the posts. Then screw a hook into each. The height from the end of the post is 1.2 meters. To facilitate your work you can pre-pierce holes in the fastening area. To the ends with attached cross-sections parallel to each other fasten two meters of bars. The ends of the bars one meter long are cut at an angle of 45 degrees. Bars in the saw area are drilled through and secured with a vertical stand. These will be the extreme crossbars.
The edges on one side are attached to the post and the other to the parallel bars. In these places a more transverse bar is installed. On a rack is an attachment to the umbrella. It is very simple. Cut two metal strips and fasten on the inside of one of the supports. The frame for the hammock with canopy is ready.